PRODUCTS: Profiles

  • CLEATS (flights) for conveyor belting

Inclined conveyors occasionally require belts with profiles or cleats (flights) on the carrying surface. These prevent slippage of the conveyed material and increases the belt capacity.

The type and height of the most suitable cleat (flight) is determined according to the characteristics of the conyeved material and the inclination of the conveyor. Optimum conveying capacity can be achieved up to angles of 70 by this means.

 

Notched trapezoidal tracking guides can be supplied; this increases belt flexibility and when fitted to the underside of the belt can reduce the minimum pulley diameter by 10%.

esbelt cleats (flights) are oil and fat resistant.

Examples of possible cleat (flight) arrangements are as follows:


 



Single transverse cleat Double transverse cleat Herringbone ("V" pattern)



Inner tracking guide Retainig sidewalls Single transverse cleat with retaining sidewalls





  • Arrangement of cleats in open "V" pattern (herringbone)

Dimensions (mm)
A 400 500 600 650 800 1000 1200
B 300 400 450 480 600 800 900
C 50 50 75 85 100 100 150
D 180 205 210 225 286 348 390
E 20 20 20 20 20 20 20
F 18 18 24 30 50 60 60
G 250 300 325 350 450 550 600





Other esbelt websites:
esbelt WASB
esbelt GO
www.esbelt.us
www.esbelt.de
www.esbelt.fr
www.esbelt.dk
Legal Information
Terms of Sale
www.esbelt.com
webmaster contact
Esbelt S.A.
Provença 385, 2o.
08025 Barcelona - Spain
Tel. +34 93 207 33 11
Fax +34 93 207 13 63

esbelt.com all rights registered